DMN960IE
990 Series Manual Call Point Waterproof With Isolator - Red (Surface Mount)
- IP67 waterproof
- Tamper resistant break glass design
- LED alarm indicator
- Resettable element
- Plug and play terminal connections for fast wiring
Related products
At a glance
General
The DMN960IE is an addressable, waterproof manual call point designed for use outdoors and in places where moisture and dirt may be a problem. It is compliant with EN54-11/17 and can be used with the 900 series device range on Aritech addressable panels. It is shipped with an easily resettable element rather than a break glass.
Operating Principles
All 960 series call points are addressed at the commissioning stage by means of a seven-segment DIL switch. The DMN960IE incorporates a short circuit isolator that ensures its operation in the event of a short circuit fault on the loop.
A single bi-coloured alarm LED is provided on the call point. The LED may be controlled independently of the call point from the FP1200/2000 fire panel. The LED is illuminated RED when the call point has been activated, or AMBER/YELLOW to indicate a short circuit.
A single bi-coloured alarm LED is provided on the call point. The LED may be controlled independently of the call point from the FP1200/2000 fire panel. The LED is illuminated RED when the call point has been activated, or AMBER/YELLOW to indicate a short circuit.
Installation and Operation
The DMN960IE helps reduce installation time as all the initial installation cabling is wired to a terminal block that fits neatly in the back of the call point.
Once activated the call point can be easily reset by using the supplied test key and simply pushing the front cover up.
Once activated the call point can be easily reset by using the supplied test key and simply pushing the front cover up.
Approvals
All manual call points in the 960 series have been tested and approved by LPCB and a number of other approval authorities.
EN54-11 and EN54-17 approved
CE and CPD certified
EN54-11 and EN54-17 approved
CE and CPD certified
Details
- IP67 waterproof
- Tamper resistant break glass design
- LED alarm indicator
- Resettable element
- Plug and play terminal connections for fast wiring
- Allows wiring continuity testing before fitting
- Built-in loop isolator
- Easy to test with auto reset
- Fast (3s) response
Technical specifications
| General | ||
|---|---|---|
| Status indication |
Red LED (Alarm), Yellow LED (Isolated)
|
|
| Electrical | ||
|---|---|---|
| Operating voltage |
17 to 28 VDC
|
|
| Communication voltage |
5 to 9 V (Protocol)
|
|
| Current consumption |
4 mA (Alarm (LED on)
1 mA (Power-up surge, 1 s)
100 µA (Quiescent)
|
|
| Physical | ||
|---|---|---|
| Physical dimensions |
93 x 98 x 71 mm (L x W x H)
|
|
| Net weight |
240 g
|
|
| Colour |
Red
|
|
| Cable entries |
M20
|
|
| Material (contacts) |
Polycarbonate / ABS
|
|
| Environmental | ||
|---|---|---|
| Operating temperature |
-30 to +70°C (no icing)
|
|
| Relative humidity |
0 to 95% noncondensing
|
|
| Environment |
Outdoor
|
|
| IP rating |
IP67
|
|
| Regulatory | ||
|---|---|---|
| Certification |
EN54-11
EN54-17
|
|
Downloads
All downloadsDatasheet
Certificates
CPD / CPR
Other EU certificate
Other EU certificate
Other EU certificate
VMC_PR-1724/064_ZP2
Other EU certificate
VMC_PR-1720/064_2X
If available, the downloads of the Certificates, Software & Firmware and Media are displayed in their default language.